Recently updated on November 25th, 2022 at 08:00 pm
Top Fishing Gadgets
Boat Engine Blower
Boat Engine Blower – A blower is a must for any yacht with an enclosed engine room or compartment. Blowers on gas-powered boats can be lifesaving. (Article about “How to install a Bilge Blower” on itstillruns.com)
Click here to go to my home page with videos of the other best-selling items.
Also check out these categories:
Best Sellers at Amazon.com: Boat Engine Blower
Acouto Bilge Air Blower 12V 270CFM in-Line Marine Bilge Air Blower 4″ DC Electric Fan Boat Accessory 12VDC White
Bilge Air Blower 12V—— This 12v bilge air blower is designed to provide ventilation for engine compartments, galleys, bilges, and heads. Please be assured that your purchase is 100% brand new.
High Productivity—— A six-blade fan maximizes airflow and efficiency, making it more dependable and practical. Low current draw, high airflow volume, and long service life. Flow rate: 270 CFM
Consistent Performance—— Sealed motor shaft for moisture protection and improved performance water-resistant motor casing and proof design for use in the marine environment
High-Quality ABS—— 4″ Marine Bilge Air Blower is made of white ABS plastic and is durable and dependable in use. The 4″ in-line marine bilge air blower is manufactured in accordance with the highest quality standards.
Simple to Install—— The built-in mounting feet on the 4″ in-line marine bilge air blower allow for vertical or horizontal installation. Ideal and direct replacement for old or damaged bilge air blowers, with long service life.
Amarine Made Marine Boat 12v Electric in Line Bilge Air Blower 130cfm
12v/2.5Amp, 130CFM, 3″ Outlet Hose or 12v/6Amp, 270CFM, 4″ Outlet Hose, Marine Boat Electric Bilge Air Blower
Vertical or horizontal installation is simple thanks to the built-in mounting feet.
Low current draw, high airflow volume, and extended life
Airflow and efficiency are maximized with a six/four-blade fan.
Corrosion-resistant ABS plastic casing, sealed motor shaft for moisture protection
Attwood 1731-4 Turbo 3000 Series In-Line Bilge Blower, For 3-Inch Interior Diameter Vent Hose, 12-Volt (Boat Engine Blower)
Engine compartments, galleys, bilges, and heads all benefit from excellent ventilation flows.
The in-line design is unique, and the 5-blade fan maximizes airflow and efficiency.
The blade sweep and pitch are designed for a high lift coefficient, which results in faster airflow for better ventilation.
By up to 25%, system airflow outperforms older-style in-line blowers.
It uses up to 40% fewer amps than competing blowers, making it up to four times as efficient.
It includes built-in mounting feet for convenient vertical or horizontal installation and is marine ignition protected.
Do not operate in an area that is hotter than 160 degrees Fahrenheit (71 degrees Celsius).
Attwood 1733-4 Blower Bilge 3″ Water Resistant , White
Engine compartments, galleys, bilges, and heads all benefit from excellent ventilation flows.
The in-line design is unique, and the 5-blade fan maximizes airflow and efficiency.
The blade sweep and pitch are designed for a high lift coefficient, which results in faster airflow for better ventilation.
By up to 25%, system airflow outperforms older-style in-line blowers.
It uses up to 40% fewer amps than competing blowers, making it up to four times as efficient.
It includes built-in mounting feet for convenient vertical or horizontal installation and is marine ignition protected.
Do not operate in an area that is hotter than 160 degrees Fahrenheit (71 degrees Celsius).
Attwood 1749-4 Turbo 4000 Series II In-Line Blower, For 4-Inch Interior Diameter Vent Hose, Water Resistant, 12-Volt
12-volt, water-resistant, white blower designed for use with vent hose having an inside diameter of 4 inches; fasteners of the #10 size are required for installation.
Marine ignition is shielded and includes built-in mounting feet for convenient installation in either the vertical or horizontal position
Offers exceptional airflow for ventilation in locations such as engine compartments, galleys, bilges, and heads.
Featuring an innovative, in-line design, as well as a 5-blade fan that optimizes both airflow and efficiency. Patented.
The sweep and pitch of the blades have been designed to provide a high lift coefficient, which leads to an increase in airflow speed and better ventilation.
For through-hulls with an inside diameter of 7/8 inches
Excellent for use in livewell drains.
attwood Turbo 3000 in-Line Blowers, White 3 inch (1733-1) (Pair) FO-2835-M (Boat Engine Blower)
Turbo 3000 ATTWOOD MODEL (1733-1). THE VOLTAGE IS 12 VOLTS AND THE DIAMETER IS 3 INCHES
THIS BLOWER HAS A NICKEL-PLATED MOTOR THAT IS CORROSION-RESISTANT. BUILT WITH A FIVE-BLADE FAN FOR EXCELLENT AIRFLOW AND EFFICIENCY
IT’S WATERPROOF and has a low-amp draw motor for prolonged battery and blower life.
MOUNTING FEET makes it simple to mount vertically or horizontally.
10 FASTENERS are required (not provided). FIVE OCEANS, 40 YEARS OF RESEARCH AND DEVELOPMENT OF HIGH-QUALITY MARINE AND OUTDOOR PRODUCTS
DC HOUSE DC 12V in-Line Marine Bilge Air Boat Blower Electric Fans (Boat Engine Blower)
Voltage: DC 12V; Amp Draw: 2.5 A; Air Flow: 130 CFM; Fuse: 5A; Intake Pipe Diameter: 3″/76mm
The upper and bottom covers of the boat engine blowers housing are made of anti-corrosion ABS plastic, and the blade is made of high-strength, high-toughness nylon, with a brushless motor that extends the fan’s service life.
Built-in Mounting Feet Make Vertical or Horizontal Installation Simple. Turn on the electricity to begin the operation, offering you clean, fresh air quickly and simply.
Design – The overall construction is compact, and the four-blade fan maximizes airflow and efficiency and produces a considerable quantity of noise.
A one-year warranty is included. Please do not hesitate to contact us if you have any questions; we will respond within 24 hours.
In-Line Bilge Blowers (Size: 4 Cfm: 240) By Seachoice Products”
Jabsco 3in. Flexmount blower 150 Cfm 24v over $150 (Boat Engine Blower)
Mounting Position: Multi Positional; Drive Type: Direct; Mounting Flange Included
Kuuleyn Bilge Air Blower, 4inch 12V 270CFM White In‑Line Marine DC Electric Fan Boat Accessory Bilge Air Blower
Application: The built-in mounting feet on the electric air blower allow for vertical or horizontal installation, and it is suitable for a 4-inch diameter hose and provides ventilation for engine compartments, galleys, bilges, and heads.
This 270CFM bilge blower has a six-blade fan that maximizes airflow and efficiency, as well as a very low current draw, a high volume airflow, is more reliable and practical, and has a long service life.
High Quality: The inline air blower is made of high-quality ABS material, which has high reliability, anti-corrosion, wear resistance, is not easily broken or cracked, and is long-lasting in use.
Brand New: 100% brand new high-quality bilge air blower, rigorously tested to ensure the best quality before shipment, and completely safe to use.
Service Guarantee: If you have any questions after receiving our products, please contact us and we will do our best to resolve your issue.
Marine Boat 12V Electric in Line Bilge Air Blower with Mute Strong Ventilation Fan 128cfm 3inch(12V) (Boat Engine Blower)
Application: The high flow 128 CFM (3,800 liters per minute) capacity ventilates the engine compartment, galley, bilge, and head.
Premium Quality: The air blower is made of ABS material, which ensures its durability, resistance to aging, resistance to acids and alkalis, toughness, and resistance to deformation. For use in the marine environment, the motor casing is acid and alkali proof and has a water-resistant design.
Hose connections on both ends for use with 75mm (3in) diameter blower hoses.
It is simple to install and can be done vertically or horizontally. Instructions for installation and operation are included. The mounting screws are not included and are only used on occasion.
Service Guarantee: High-quality service, prompt delivery, and simple after-sales support.
As much as we can, we guarantee your satisfaction.
If you are dissatisfied, please let us know and we will respond within 24 hours.
MARINE CITY 12-Volt 3- Inches Diameter Hose Bilge Blower 158 CFM CE Certificate for Boat Heads Engine Compartments Bilges Galleys RVS Buses Sheds More
Certificate of conformity (CE) Made of ABS Injection Molding. Engines, compartments, bilges, galleys, and head closets are all good candidates.
Low-amp draw five-blade fan maximizes airflow and efficiency. Longer blower and battery life thanks to the motor
To keep water out of the motor, wear a waterproof boot over it.
Hose Diameter: 3″, Voltage: 12 V DC, Length: 5″, Amps: 2.5; Fuse: 2.7 A, 158 CFM
Marine HIGH-Performance ABS Black Turbo in LINE Bilge Blower 4″ Diameter 12V (Boat Engine Blower)
3 amps at 12 volts DC
Open Flow Output: 200CFM, Hose Size: 4 “I.D.
5″ (length) x 6 2/5″ (width) x 4 2/3″ (height) ” (Height)
Built-in Mounting Feet are the preferred mounting method.
P13020BK is the item number for this item.
MARINE HIGH-PERFORMANCE WHITE TURBO INLINE BILGE BLOWER 3″ DIAMETER 12V by PactradeMarine
140 CFM Capacity
blade housing and 3″ opening
5″ in diameter with a 5″ wide base.
Fan with 1.5A5 blades.
P13019WH is the item number for this item.
Oasis Marine 3-inch 12V Electric in-Line Bilge Boat Air Blower
Oasis Marine provides a two-year warranty.
The included mounting feet allow for simple vertical or horizontal installation.
12v 2.5Amp, 3″ Outlet Hose, low current draw, high volume airflow
A four-bladed fan increases airflow and efficiency.
Corrosion-resistant White ABS plastic housing, sealed motor shaft for moisture protection
Oasis Marine in-Line Bilge Boat Air Blower 4-inch 12V Exhaust Fan (2-Year Warranty)
Oasis Marine offers a two-year warranty.
12v 6Amp, 4″ Outlet Hose, minimal current draw, high volume airflow
Corrosion-resistant White ABS plastic casing, sealed motor shaft for maximum moisture protection
Vertical or horizontal installation is simple thanks to the built-in mounting feet.
Airflow and efficiency are maximized with a six-blade fan.
SEAFLO 3″ In-Line Marine Bilge Air Blower 12V 130 CFM Quiet Boat White
SFIB1-130-01, 12V, 2.5A, 130CFM, 3″ Outlet Hose Model: SFIB1-130-01, 12V, 2.5A, 130CFM, 3″ Outlet Hose
Low current draw, high air flow volume, and long-lasting motor
Engine compartments, galleys, bilges, and heads all benefit from ventilation.
4-Year Limited Warranty
Incorporated-in molded mounting brackets for vertical or horizontal installation are built into the white ABS plastic construction.
SEAFLO 4″ in-Line Marine Bilge Air Blower 12V 270 CFM Quiet Boat White
Flow capacity: 270 CFM, voltage: 12V DC (Cubic Feet per minute)
Current Draw: 6 Amps, Fits 4″ Hose Diameter
Engine compartments, galleys, bilges, and heads all benefit from ventilation.
Built-in molded mounting brackets are molded into the white ABS plastic structure.
For usage in the marine environment, a corrosion-proof design and a water-resistant motor case are required.
SEAFLO Flex Mount Bilge Air Blower 320CFM Boat Ventilation Marine 12V 4″
320 CFM High-Flow Capacity
Only 11 amps of current are drawn.
10.43″ Width: 6.14″ Height: 10.94″ Length: 10.43″ Width: 6.14″
Weaver Livestock ProAir Blower – Industry-First Design – Compact, All-in-One Unit – Specialty Nozzle Delivers Concentrated High-Velocity Stream – Assembled in The USA, Patent Pending Design
The double blower system is replaced by a compact, all-in-one unit that produces the fastest air speeds on the market, an industry first.
Exit velocity was tested to be greater than that of a double blower system.
The specialty nozzle produces a precise, concentrated, high-velocity stream of air for quick drying.
ProAir generates cool air to keep your pet from overheating.
Air enters the side inlets and bypasses the blower’s electrical components, resulting in cooler air being emitted from the hose; a separate inlet and vent on the top cool the blower’s electrical components.
XMSound 4″ Electric In-Line Marine Bilge Air Blower 12V 270 CFM Quiet Boat White
12v/6.0Amp, 270CFM/456CMH, 4″ Outlet Hose, Marine Boat Electric Bilge Air Blower
The air blower is used to ventilate the engine area, kitchen, and bilge.
It can be used as a defroster fan, as well as to cool the amplifier on the boat, an amp rack, and bathroom ventilation, among other things.
Six-bladed fan: Produces a lot of air, is made of ABS plastic and operates quietly.
Easy to Attach: With the mounting stand, you may install it vertically or horizontally;
1 pack marine boat electric bilge air blower is included in the package.
Yaegoo Marine Boat 3″ in-Line Bilge Air Blower DC 12V 130 CFM
3″ Outlet Hose, DC 12V, 2.5A, 130CFM
Low current draw, large air flow volume, and a long-lasting motor
Engine compartments, galleys, bilges, and heads all benefit from ventilation.
Incorporated-in molded mounting brackets for vertical or horizontal installation are built into the white ABS plastic construction.
Vertical or horizontal installation is simple thanks to the built-in mounting feet.
YaeMarine 3 Inch 12V in-Line Blower Electric in-Line Marine Bilge Air Blower 130 CFM White for Boat Marine
In-Line Marine Bilge Air Blower, 12V, 2.5A amp draw, 130/220(CFM/CMH) airflow, 3in/76mm intake pipe diameter, 3A fuse;
It comes with a mounting stand that allows for vertical or horizontal installation.
Four Blade: Maximizes airflow and efficiency;
High airflow, low current draw, and extremely efficient;
Sealed Motor Shaft: Waterproof, corrosion-resistant, ABS plastic, long-lasting.