Boating Fuel Tanks

Recently updated on November 30th, 2022 at 05:54 pm

Top Fishing Gadgets

Boating Fuel Tanks

Fuel Tanks for Boats

Boating Fuel Tanks – To run properly, your boat’s engine requires proper fueling, which means you’ll need a fuel system if your boat has such an engine. (Article about “Fuel Tank” on Wikipedia)

Click here to go to my home page with videos of the other best-selling items.

Best Sellers at Boating Fuel Tanks

AloneGoer Portable Boat Fuel tank 12L 3 Gallon Marine Outboard Gas Tank for YAMAHA Barco De Motor Fuera De Borda with Connector

12L 3 Gallon Fuel Tank with Marine fule line connector hose for Motor Fuera de Borda

UV resistant stable plastic (polyethylene), lightweight, easy to carry, safe, and long-lasting

3-gallon capacity;

Most people think it’s a 12-liter tank, but it only holds 11.3 liters.

A screw cap with a vent allows you to adjust the air pressure balance.

Standard nozzle: used for outboard engine interface (more than 6 HP) from the rear hole.

attwood 8803LP2 EPA and CARB Certified 3-Gallon Portable Marine Boat Fuel Tank

The automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems.

No need for manual venting with this cap’s built-in vacuum valve.

EPA and CARB (California Air Resources Board) regulations are met.

All ABYC/NMMA requirements for portable marine fuel tanks are met.

Attwood products are both compatible and dependable, and they are designed and built with a never-say-die attitude.

Attwood EPA Certified Portable Fuel Tanks

The Pressure Build-Up Associated With Closed Fuel Systems Is Withstood By Automotive-Grade, Multi-Layer Construction

No need for manual venting with this cap’s built-in vacuum valve.

Epa and Carb (California Air Resources Board) regulations are met.

All Abyc/Nmma requirements for portable marine fuel tanks are met.

Boat Fuel Tank, 12L 3 Gallon Gas Can Marine Outboard Motor Boat Accessories, Portable Gasoline Can work with Fuel Gauge/Fuel Line Container for 2-4Stroke Outboard Engine

EXQUISITE DETAILS – The fuel gauge allows you to clearly see changes in the fuel tank and the remaining fuel level, allowing you to replenish it in a timely manner. It is easier to use because the fuel tank cap and intake valve are integrated. To prevent oil from spilling out, the air inlet and oil outlet are separated. Furthermore, the pure copper interface process is more complete and lasts longer.

PREMIUM MATERIAL – Our boat fuel tank is made of high-density polyethylene as the base material and anti-static additives, which have anti-ultraviolet, anti-aging, impact resistance, corrosion resistance, and acid resistance properties. It can naturally rebound without permanent deformation. Furthermore, no electric spark will be produced during friction and impact to cause an explosion.

SELF-EXHAUST NOZZLE – The air inlet to the fuel tank has a built-in filter to keep dust and foreign objects out. The screw-on cap with a vent hole can automatically vent, forming a smooth fuel flow and minimizing leakage.

DESIGN FOR PORTABILITY The three-dimensional texture surface not only improves the aesthetics of the gas can but also improves the feeling of holding a hand, ensuring that the force is evenly distributed and the hand is not restrained. It has an I-shaped lifting handle that makes it more ergonomic, convenient, and quick to carry and store.

MULTIPLE USAGE & LARGE CAPACITY – The dimensions of the gas tank are 14.5 x 11.8 x 10.2 inches. 3-gallon large capacity (12L). Comply with EPA and CARB regulations. Keep it in your trunk, garage, shop, scrapyard, toolkit, shed, or closet for quick, clean, and dependable liquid transfer. Excellent for automobiles, motorcycles, boats, lawn mowers, snowblowers, and other similar items.

Boat Fuel Tank 3 Gallon, Marine Outboard Motor Fuel Tank with Hose Connector, Compatible with Kayaks, Small/Large Boats, Inflatables, and Canoes- Red

Built to Last- This boat fuel tank is made of high-density polyethylene, which has low permeability, anti-aging, and impact resistance. It will not rust, crack, or chip, and it can naturally rebound after an impact without permanent deformation.

Marine portable fuel tank 3 gallons (12 liters) includes 1 pcs fuel line and 1 pcs primer bulb, the fuel hose comes with snap-on connectors to allow quick attachment and removal of the boat fuel tank and outboard engine, fuel up with ease. It’s ideal for small to medium-sized boats, inflatables, canoes, and even kayaks.

Scientific Design- A lifting handle with an I shape is more ergonomic. It is lightweight and compact, making it easy to transport and store, as well as being durable and strong. Sealing and venting are the two functions of the outboard boat motor fuel tank cap. There is also a separate air inlet and oil outlet to prevent oil from spilling.

With Fuel Gauge- Marine fuel tanks include a high contrast fuel gauge that allows you to accurately monitor the remaining fuel level without removing the fuel cap, allowing you to clearly understand the changes in the oil and replenish it on time.

Fuel Tanks for Boats

Boat Fuel Tank, Boat Gas Tank with Hose Connector, and Oil Volume Indicator for The Outboard Engines (12L/3 Gallon)

Large Capacity Boat Fuel Tank — 3 gallons (12 L), tank opening diameter is 1-1/2 “This is an outboard fuel tank that can be used with outboard engines. It measures 14.1″ (L) *10.2″ (W) *7.87” (H).

Marine fuel tanks are made of durable, light, high-density polyethylene (won’t chip, crack, or rust), easy to carry, easy to store, safe and strong, and suitable for gasoline.

The Fuel Tank Cover comes in two styles that can be sealed and deflated, making it safer to use. Screw cap with top vent, fuel collection pipe, and 1/4 “Internally threaded NPT fuel tank accessories, molded handle on top of the tank

The Fuel Tank is a Full Assembly that includes a fuel connector, a fuel gauge, and a fuel cap with an internal filter. A strainer in the filter tank filters the residue in the oil to make it purer.

An Oil Volume Indicator – This allows you to clearly understand the changes in the oil tank as well as the remaining oil volume, allowing you to replenish it on time. To ensure clean fuel, a filter is built into the air inlet of the fuel tank.

DNA MOTORING ALU-FT-B-TF-12G Aluminum Top-Feed Fuel Cell Gas Tank

Tank dimensions: 30 “(L) x 9″ (W) x 12” (H)

a fuel pickup, a rollover vent, and a fuel return

Only for use with external fuel pumps.

Top feed / can be used in conjunction with remote fill

1.75 OHM fuel sender / 0-90 OHM fuel sender “cap for filler neck

John Dow Industries JDI-AFT58 Auxiliary Fuel Tank (58-Gallon), 1 Pack

Linear polyethylene construction that is tough

A 12-volt transfer pump moves fuel at a rate of 10 gallons per minute.

When the tank is full, integrated forklift pockets allow it to be moved.

There are integrated recesses for securing tanks with ratchet straps during transport.

With a protective and lockable cover

Johnson Evinrude OMC DuraTank 6 Gallon Portable Fuel Gas Tank, 5008623

For use on outboards with 3/8″ shafts up to 150hp “assembly of hoses (not included)

The tank measures 18.5″ x 11.5″ x 11.5″.”

One of the best fuel tanks on the market, with a 3-year limited warranty.

Part number 5008621 is the replacement for part number 5008623.

Moeller LPT12 Above Deck Fuel Tank, 12 Gallon Low Profile with EPA Cap

MOELLER 630013LP, MOE630013LP

Fuel Tanks for Boats

Moeller Marine EPA- Compliant Topside Fuel Tank – 6 Gallons, Low Profile, Model# 620049LP

High-density polyurethane with ultraviolet inhibitors is used to make this product.

20.50″Lx12.75″Wx10.50″H Dimensions

Comply with current US Coast Guard and ABYC standards.

One-piece seamless construction

Moeller Portable Fuel Tanks, Sight Gauge, Seamless, EPA Compliant

They are up to 30% tougher than other brands because they are made of seamless, thick-walled plastic.

Dimensions: 24.51″ L x 17.76″ W x 10.82″ H 621009-10 replacement pickup, 305994-10 replacement cap, and 621001-10 replacement gauge

Portable tanks, which are not intended for permanent installation, are used to deliver fuel directly to the engine.

Prevent hydrocarbon escape at the molecular level, allowing them to meet EPA emissions and permeation requirements.

3-gallon storage capacity

Portable Boat Fuel Tank 24L 6 Gallon Marine Outboard Motor Fuel Tank w/Connector

This outboard tank is made of UV Stabilised Plastic (polyethylene), which will not rust, crack, or chip.

The interface is outward from the rear hole of a standard nozzle.

Portable Boat Outboard Fuel Tank Marine Motor Fuel Tank 6 Gallon 24L With Fuel Hose Line And Connector Compatible With Inflatables, Canoes, And Kayaks

For Small/Large Boats, Inflatables, Canoes, And Kayaks

The fuel tank is designed with a seamless integrated polyethylene fuel tank shell structure, advanced styling, and a highly functional design.

There is a nut with its own air exhaust to reduce leakage, and there is also a filter in the fuel tank to filter out debris.

Dimensions: 17.7 x 11.8 x 10.4 in. 6-gallon large capacity (24L), This fuel tank is UV-resistant, impact-resistant, anti-aging, acid-proof, corrosion-resistant, and not easily deformed. You can purchase with confidence.

Warranty: If the product you received is deformed or damaged, please contact us via message; we will provide warranty service for damaged products, giving you a worry-free shopping experience.


Carry handle built into the top of the tank

Fuel Tanks for Boats

Quicksilver 8M0047598 Portable Marine Boat Fuel Tank with Fuel Demand Valve, 3.2-Gallon Capacity

Carry handle built into the top of the tank

Scepter Rectangular Fuel Tank

The 12 Gallon capacity measures 22.9″L x 14.3″W x 13.9″H and is ideal for outboard engine boats and boaters looking for extended running time.

Rugged one-piece tank shell construction reduces fuel evaporation and keeps octane value for longer periods of time.

Transporting this fuel tank is made simple by integrated molded hand holds.

The convenient fuel pick-up/sight gauge accepts standard 1/4 NPT marine tank fittings.

For long life, it is made of UV stabilized, high-density polyethylene.

System of automatic air inflow valve/fuel cap

It is compatible with gasoline and ethanol-blend fuels.

Produced in Canada

Scepter USA 6792 Duramax 14 Gallon Flo-N-Go Fuel Caddy, Red

RUBBER 20% / RESIN 80%


Portable fuel container 14 gallon

Made of tough, high-density polyethylene

The pumping system is based on the siphon. The hand pump eliminates spills and overfills by stopping and restarting the flow of fuel as needed.

10′ hose with hanger for convenient storage

Use gasoline, diesel, or kerosene.

Sierra International 031624 24 Gal Topside Tank, Moeller Red

Color of the Tank: Red

The capacity of the tank is 24 gallons.

Topside fuel tank

Crafted with only high-grade components

Dimensions 29 25″ x 19 00″ x 14 09″

Universal Fit is the sort of fit.

Stark Universal 20-Gallon Aluminum Fuel Cell Tank Hot Rod Lightweight Polished Fuel Diesel Racing Street Drift DIY 20 Gal Capacity Storage

Universal application to hot rods, street racing, track cars, drift, trucks, and SUVs, among other things.

It has an open-cell foam core to prevent vapor explosions in the empty portion of the tank and to reduce fuel sloshing during competition, which can unbalance the vehicle or cause insufficient fuel delivery to the motor (fuel starvation)

Made of high-quality aluminum material for extra protection, it is light in weight, sturdy, durable, and resistant to rust, and it can keep the inner liquid clean and of high quality for a long time.

Fuel cells can provide more dependable power wherever it is required, making the entire electric power grid more robust and dependable.

Simple to install and maintain Include a fuel tank with an oil level sensor and a tank with replaceable anti-slosh foam.

VEITHI Rectangular Portable Boat Fuel Tank with Hose Connector for Marine Outboard Motor Fuel Tank- Red (1pack)

Material- The 3-gallon boat fuel tank is made of high-density polyethylene as the base material, which is anti-aging, impact-resistant, and corrosion-resistant. Following an impact, it can naturally rebound without permanent deformation.

Convenient to Carry and Place- The outboard motor fuel tank has an I-shaped lifting handle that is more ergonomic, easy to carry and store, rust protection, durable, beautiful, easy to use handle design, lightweight, portable, and convenient to carry.

Two Sealing and Venting Modes-There are two designs of fuel tank caps that can be sealed or vented, and the metal nut can be vented and used safely (high-quality spring designed for deflation). To release the air in the fuel tank, unscrew the yellow metal nut. Tighten the yellow metal nut, and the oil tank is airtight), forming a smooth fuel flow and minimizing leakage.

An Oil Volume Indicator assists you in clearly understanding the changes in the oil tank and the remaining oil volume to replenish it on time. To ensure clean fuel, a filter is built into the air inlet of the boat fuel tank.

Large Capacity- This outboard motor fuel tank kit comes complete with a 1pcs boat fuel tank, a 1pcs boat fuel line hose, 2pcs ends fuel connector fittings, and 1pcs primer bulb. This is an outboard fuel tank with a capacity of 3 gallons (12 L) and a tank opening diameter of 1-1/2in. It can be used with a variety of outboard engines. It is ideal for small and large boats, inflatable boats, and kayaks.