Outboard Motor Brackets Boat

Recently updated on October 20th, 2022 at 08:27 pm

Top Fishing Gadgets

Outboard Motor Brackets Boat

A device known as an outboard bracket is a piece of hardware that is attached to the stern of a boat in order to hold an additional outboard motor. (Article about “What is an Outboard Bracket?” on wikimotors.org)

Click here to go to my home page with videos of the other best-selling items.

Best Sellers at Amazon.com: Outboard Motor Brackets Boat

Amarine Made 7.5hp-20hp Heavy Duty Stainless Steel Marine Outboard Auxiliary Boat Motor Bracket

Stainless steel, spring-loaded (four vertical positions) adjustable bracket, heavy-duty with reinforced welded frame and stamped stainless components

Wide track body for added stability, solid polypropylene mounting board

Simple to lift and lower – Stainless springs assist in counterbalancing motor weight.

The outboard motor bracket fits 2-stroke motors ranging from 7 1/2 to 20 HP and has a maximum weight of 52kg (115lbs), making it ideal for small to medium-sized powerboats and yachts.

Note: You can get the most friendly customer service, so please contact us if you have any problems while using it, and you have 90 days to return or refund it.

Attwood Heavy-Duty Transom Saver 24 “-36 ” 4000-ADJ Heavy Duty Transom Saver 24 “-36 “,

Supports the weight of an outboard motor that has been tilted.

Adjustable from 24-36 inches to accommodate a variety of installations.

Mounts for roller brackets are included.

Replaceable rubber pads protect the lower unit from scratches.

Fits all outboard motor brands

Attwood SP-402 Replacement Bolt On Bracket SP-402 for Attwood Transom Savers

Transom saver head bolt-on bracket replacement

When an old bracket becomes damaged or worn, it is simple to replace.

Supports the weight of the outboard or stern drive unit while trailering or storing it to relieve pressure on the boat transom or engine transom bracket.

Brocraft Deck Mount Trolling Motor Bracket

Universal electric trolling motor bracket for clamp-on type trolling motors.

Made of marine aluminum and black Nylon plastic.

When the boat is under engine power or being trailered, the motor is designed to be removed.

Only for electric trolling motors. No outboard engines of any size are permitted.

The trolling motor has a maximum thrust of 36 pounds and comes with a two-year limited warranty.

Five Oceans FO1586 Rail-Mount Outboard Motor Bracket, Up to 80 lb and 1 inch (25.4mm) Rail Diameter, UV-Stabilized Polypropylene, Stainless Steel Hardware Included

This rail-mount outboard bracket from Five Oceans keeps your small outboard safe and upright on the stern rail (rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods).

It comes with two-piece mounting blocks that clamp around a 1-inch (25.4mm) O.D. T rail and can support outboards up to 80 HP.

Fits 7/8″ and 1″ rails, as well as rails with 90 tee fittings. Four (4) stainless steel fasteners are included with the attachment hardware.

To withstand the conditions of the marine environment, it is made of UV-stabilized polypropylene.

It can be used to mount barbecues, downrigger brackets, fish cleaning tables, and other items. FIVE OCEANS, 40 YEARS OF CREATING QUALITY MARINE & OUTDOOR PRODUCTS

Five Oceans FO4204 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 88lbs 40kg, Black Poly Mounting Board 20HP

Heavy-duty structure made of polished AISI3616 stainless steel. Extra-wide black poly mounting board 10-1/4 inches x 7-1/2 inches for new wider style motor locking clamps. Transom Plate Dimensions: 4-3/8 inch x 3-3/8 inch

They are intended for 4-stroke engines. Allows for long or short shaft motors. New twist lock safety knobs with ergonomic designs keep the bracket in place.

With a maximum weight of 88 pounds, it is suitable for motors up to 20HP. Designed to withstand the harsh conditions of the sea. Ideal for pontoon, small power, and sailing boats.

Designed specifically for new four-stroke, heavier, high-torque motors. Allows you to easily raise and lower trolling and auxiliary motors.

Hihitomorrow Complete Aluminum Anode Kit Compatible with 2004+ Mercruiser Bravo III Drives Sterndrives Replace for CMBRAVO3KITA

APPLICATION: The aluminum anode kit is designed for Mercruiser Bravo III sterndrives manufactured between 2004 and the present. The anodes last longer than zinc anodes and can be used in both fresh and saltwater.

The anodes kit provides low-cost cathodic protection for your Mercury Mercruiser boat engine, preventing corrosion and pitting on your MerCruiser Bravo III Drive and engine.

MATERIAL: The aluminum anode kit is made of superior alloys that offer maximum protection for boats, structures, and equipment made of iron, steel, aluminum, and other metals.

PACKAGE INCLUDES 1 cavitation plate anode, 2 trim cylinder anodes, 2 trim tab anodes, 1 propeller nut anode, and 9 different spec bolts and 8 washers.

Satisfaction Guarantee—We guarantee your complete satisfaction. If you have any questions about our product, please do not hesitate to contact us.

ISURE MARINE Stainless Steel Boat Outboard Motor Brackets Kicker 7.5-20HP Heavy Duty AdjustableTrolling Yacht

Board area: 190*263mm

Compatible with two-stroke motors ranging from 7 1/2 to 20 horsepower and weighing no more than 52 kilograms (115lbs).

The mounting board is made entirely of polypropylene Heavy-duty springs make it simple to raise and lower the motor; they also help counterbalance its weight.

Frame made of marine-grade anodized aluminum, which is both heavy duty and lightweight; stainless steel springs

Ideal for sailboats and powerboats ranging from ten to fifty feet in length Charged by a spring (5 vertical positions) bracket that can be adjusted, wide track body for increased stability

LOBOTOU Inflatable Boat Engine Outboard Motor Mount Bracket

EASY TO SET UP

Please double-check the size of the bracket mounting hole.

This motor bracket is designed for electric motors; fuel engines with more than 4 HP are not recommended.

Marinebaby Boat Outboard Motor Bracket, Aluminum Boat Engine Support 20 HP

Heavy-Duty Aluminum Motor Bracket for 2-stroke Motors 7-1/2 HP to 20 HP, by Marinebaby

Counter-balanced motor weight with stainless steel springs, solid polypropylene mounting board

Height Adjustment Range: 195mm-320mm in 5 Positions

8″ * 10.2″ (205mm*260mm) in size 5.2″ * 9″ (132mm*230mm) mounting size

Super corrosion resistance and high endurance, ideal for your engine.

1* motor bracket (mounting hardware not included); 8mm screws required

Marinetech – 55-1900 ADJ TRANSOM SAVER MOTOR SUPPORT

Fishing Equipment is the product type.

1 package is available.

7.4-pound package weight

Taiwan is the country of origin.

Mercury Transom Saver Alternative – 2 Stroke 115-200hp Outboard Motors

Fits 150-175hp Optimax, 200-250hp Carborated, 200hp EFI, and PRO XS 115-175HP engines.

Transom Mount: 7-7/16″ Yoke: 3-1/8″

Stainless steel marine grade with high-impact nylon caps

Lifetime warranty and made in the United States of America

Guy Eakers, Ott Defoe, and Timmy Horton have all recommended it.

Mercury Transom Saver Alternative – 2 Stroke 200-300hp Outboard Motors

Fits Optimax 200-300hp, 225-250hp EFI, and PRO XS 200-250HP engines.

Transom Mount: 7-7/16″ Yoke: 4-9/16″

Stainless steel marine grade with high-impact nylon caps

Lifetime warranty and made in the United States of America

Guy Eakers, Ott Defoe, and Timmy Horton have all recommended it.

Mercury Transom Saver Alternative – 4-Stroke 75–115hp and 175–300hp Outboard Motors

Fits newer Mercury 4-Stroke, Sea Pro, and Pro XS engines with 75–115hp and 175–300hp.

Mercury 150hp and Mercury Verado Series are not included.

Includes four 4″ hydraulic steering clips with a high visibility cord for simple on/off operation.

Marine-Grade Stainless Steel Components with High-Impact Nylon End Caps and Pressure and UV Resistance

Lifetime Warranty, Made in the USA, and Trusted by Professionals such as Timmy Horton

Minn Kota 1810302 Talon Sandwich Adapter Bracket – Port

1810302

Type of Fit: Universal Fit

Minn Kota 1854036 MKA-16-03 Quick Release Bracket, Bulk

Slide the motor inboard 6″ for a better fit and more clearance when launching the boat.

Allows for the quick removal and reattachment of the trolling motor to the boat deck.

For added security, the upper and lower plates include a slot for securing with a padlock (not included).

The cam-lock design reduces bracket movement and noise; stainless steel mounting hardware, lanyard, and locking pin are included.

Ulterra, Terrova, Power Drive, Power Drive V2, and Deckhand 40 are all compatible.

Minn Kota Bracket & Hinge Assembly 2991815A

Transom Thickness Maximum 3″

Max Width 6″ (From a washer to washer) (From washer to washer)

ABS plastic construction

2991815A is the product number.

Motor Mounting Bracket with Screws and Nuts Compatible with AZXRHWYGS 10ft Red Boat

Usage: If you order our boat and want to install a motor, you must also order this motor bracket. (No motor included)

Please keep in mind that this bracket is only compatible with our brand of boats, not other brands.

Material: High-quality plastic + stainless steel, which is long-lasting and stable enough to support the motor.

It is very simple to assemble; simply install the screws and it can be attached to the stern of the boat.

Product Warranty: Our bracket comes with a manufacturer’s warranty, and we stand 100% behind our products. If you have any questions, please do not hesitate to contact us.

Newport Vessels NK180 Kayak Trolling Motor w/ Mounting & Steering Bracket Kit 1.8hp Equivalent Brushless Motor Compatible w/ 24V Lithium, AGM, or Lead Acid Deep Cycle Batteries (Battery Not Included)

24V Brushless Motor: The 1.8hp equivalent Direct Drive motor delivers quiet and efficient power without the use of internal gears, allowing you to go at speeds of up to 5 knots!

The aluminum motor mount attaches directly to PowerPole-equipped fishing kayaks and may be placed on other kayaks with a drill.

Battery Options: The motor can be powered by lead acid or lithium deep cycle batteries with nominal output voltages ranging from 24V to 29V. Take note that some lithium batteries produce more voltage than the rated voltage; choose cautiously.

Motor, Speed Controller, Emergency Stop Key, Motor Mount w/ Quick Release, 5ft Battery Cable Kit, Steering Triangle, Height Adjustment Collar, Motor Lift Arm, Steering Cables, 4x Nylon Cords, Raise/Lower & Reverse Lock Handles, Installation Hardware, Owners Manual are all included in the box.

Why should you choose Newport? Since 2009, Newport Vessels has served the marine sector. We back up every product we offer with a two-year warranty and a customer care team you can talk to!

Newport Vessels Transom Lock for Trolling Motors, Black

FITS: Fits any brand transom mount trolling motor and most outboard transom mounts with less than 20hp.

APPLICATION: Serves as a theft deterrent, keeping your motor safely and securely attached to your transom.

SUPERIOR QUALITY: Made to last, keep your keys safe, and this lock will keep your trolling motor safe for years to come.

DIMENSIONS & CONSTRUCTION: 8″x2″x1.75″ – Made of steel for maximum strength and durability. To reduce rattling and vibrations, the interior is lined with high-density foam.

PANTHER MARINE 55-0028 Fixed-Mount 4-Stroke Outboard Motor Bracket

Works with two- and four-stroke engines up to 35 HP and a maximum weight of 263 lbs.

A sturdy polypropylene mounting board is included.

Stainless steel mounting hardware and a safety cable are included.

To ensure proper installation procedures, follow the manufacturer’s recommendations and guidelines.

PANTHER MARINE 55-0407AL Lightweight 4-Stroke Bracket – Aluminum

Designed for 2- and 4-stroke engines weighing up to 15 HP or 132 lbs.

You can fine-tune the motor height for optimal performance with 10″ of travel and 5 vertical running positions.

Do not use without the Panther 55-0415 safety cable, which is included.

Meets ABYC requirements

Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket – 10 “

For changing water or load conditions, set your trolling or auxiliary motor to one of five vertical running positions.

The anodized aluminum bracket is designed to withstand the increased weight and torque output of today’s four-stroke engines with long or short shafts.

Universal fit type

Motors up to 35 HP, 263 lbs., and 10″ of travel are supported.

SE Sport 200 Hydrofoil, fits 8 hp – 40 hp engines

Control is quick and precise thanks to the narrow streamlined shape.

Removes the downturned trailing edge and cupped underside to eliminate drag.

The crescent shape and control tips improve thrust.

Hardware for installation is included.

Fits engines ranging from 8 to 40 horsepower.